Kitchen Design Style Tips Only the Pros Know!

Kitchen designers should first consider the 30 plus National Kitchen and Bath Association guidelines when designing a kitchen.

After doing that the best designers know the simple tips below. Inexperienced designers, architects, interior designers, and homeowners usually do not. This is just the tip of the iceberg for good kitchen design.

1) Never leave crown moldings closer than 9 inches from a ceiling. Once you get within a foot of the ceiling you should have the cabinetry and molding meet ceiling. Don’t create spaces that look odd and that can’t be cleaned.

Molding too close to ceiling without reaching it.

2) Professionals avoid corner sinks and equal sized double bowl sinks because they create such dysfunctional designs.

3) Keep cabinetry the same distance away from each side of a window.

4) Keep cabinet doors the same size and on either side of a window, sink or cooktop.

Cabinet doors on either side of the window are different sizes. Notice the other mistakes like the distance from the wall cabinets to the window is different on each side of the window and the crown molding is too close to the ceiling.

5) Some cabinet door styles, or colors are so unpopular they that destroy the value of a home. Arched wall cabinet doors or golden oak stained kitchens are home value detractors. Pickled pinkish stain and white raised panel plastic Thermafoil cabinets are also home value killers.

6) Never run cabinets all the way to the ceiling without a two-piece crown molding or a solid wood spacer. Ceilings are never level and there needs to be some way to disguise this.

7) Never put 8 feet of cabinetry in an 8-foot space. Professional kitchen designers know that walls are out of plumb or have bulges and that you can NEVER completely fill a space with whole cabinets. Fillers allow designers to make the adjustments that make a kitchen look right.

8) Good designers almost never use 42″ high wall cabinets and would NEVER use anything higher. Builders and amateurs use these heights to maximize cabinetry not realizing that the higher height looks out of proportion and gives little added space benefit. Cabinetry doors look best when their size is closer to The Golden Ratio. Good designers will stack cabinets with small cabinet doors on top to avoid overly tall wall cabinets.

42″ Wall Cabinets. Don’t they look silly so tall?

9) Always upgrade to all plywood construction or at the very least make every exposed surface real plywood. Particle board cabinets have plastic pictures of wood on their sides that discolor and peel quickly.

10) Highly grained man-made quartz and Corian countertop patterns such as the beautiful Cambria Brittanica cannot be seamed inconspicuously. These type patterns only work on tops without seams.

Cambria Brittanica countertop

11) Never start the demolition on a job without a completed design plan finalized. NO time is EVER saved rushing. When contractors know what the complete project entails costs are lowered, and the job runs smoothly.

The people that finish first are never the ones that started first, they are the ones that planned to completion first and then started. When you hear a story about a kitchen that took 6 months or a year this was the fault of the unprofessional people organizing the job.

12) How much cabinets cost has little to do with their durability and more to do with the cabinet lines ability to customize. Doing a simplistic design or finish in a very popular door style like a shaker style in an expensive cabinet line is often just throwing money away.

13) Higher price level stone and man-made tops are not more durable, they cost more because of their color and pattern. In fact, the higher-level tops while beautiful, may require more maintenance or be hard to seam.measure

14) The first constructive step in starting a kitchen project is having a professional kitchen designer measure the space. Any design work or material selections made prior to a professional kitchen designer measuring is inefficient and can lead to frustrations when surprises and problems are revealed to you by someone with more knowledge and experience.

15) The best kitchen designers will not ask for the design you want. They will show you designs that make sense for your space. You can make changes from there to achieve the kitchen you want after considering what a professional would do with your space. Saving money on material selections will make almost any design affordable. So, keeping a layout the same ALMOST NEVER makes sense. It is the design itself that gives value to your home. Upgrading to professional appliances or custom styles and colors can be beautiful but the added expense is wasted if the design itself is poor.

Designers that give customers what they think that they want without at least showing them what’s possible is taking the easy road and the final kitchen always suffers.

Close up of the kitchen range and vent on the island
Main Line Kitchen Design 2014 CotY Award winner

Here is a link to some other design tips:

Wishing all our customers a relaxing and enjoyable summer, and of course…

Bon Appetit!

Paul, Julie, Tom, John and Ed

Main Line Kitchen Design.

63 Replies to “Kitchen Design Style Tips Only the Pros Know!”

Join the conversation

  1. Laura

    My kitchen was just completed and there were several issues. The most upsetting is that my upper and lower cabinets do not line up, leaving almost six inches of empty upper wall space between the upper cabinets and sliding door trim. I realize with appliances on the lower run, it would be impossible to completely align uppers and lowers, but almost six inches of empty wall space? I have a small townhouse, gutted the kitchen, removed a wall, extended cabinets to the ceiling with crown molding – all for more light, function and necessary storage. The layouts and renderings show and “L” design. Upper and lowers line up at the end of the cabinet run by the sliding door. The designer used a 15″ and 30″ butt for 45″ total. Maybe he used this layout for door symmetry, but I needed as much storage as possible. So, 18″ and 30″, 15″ and 33″, 21 and 30″, even single cabinets would fill the space, add to the flow and provide more storage. That little bit does make a difference, which was the whole point of remodeling. My tile installer aligned the backsplash with the upper cabinets because extending the backsplash with the countertop looked ridiculous. Even he said it was wasted wall space. The designer and contractor are non-responsive, but they have been around for a really long time. The contractor has a great reputation but was clearly overextended. He never even returned to install handles (no, he was not fully paid, only draws). I think they looked at a small kitchen as easy, when it takes more precision. I hired a new contractor and, together, we figured out the difference between the drawings and renderings and what I got – and we had to look UP. They aligned the cabinet crown molding with the end of the lower cabinet run. Molding is decorative. I wish I had found this blog, but I still would not have seen this in the renderings. So much time and money, and I am staring at 6″ of empty wall. My brother is getting designs for a new build. What did I miss in reviewing the renderings, what should I have asked – so I can tell him?

    1. pmcalary[ Post Author ]

      Hi Laura,
      You and your kitchen designer and the contractor are supposed to go over your design to make sure everyone agrees with the plan BEFORE you order cabinetry. You review each cabinet one by one and look at all the 3D drawings to make sure you are happy. The cabinet contract should show each 3D view and you should sign each view to approve the design. If you signed and still were confused then it is your fault. If the designer didn’t do this then they aren’t very good, and the first contractor also may have “been around” a long time but they aren’t good either. Everyone is supposed to be responsive. If they aren’t that’s what bad Google, Yelp, and Houzz reviews are for.

  2. Jeff Carbine

    I loved it when you said never leave crown moldings closer than 9 inches from a ceiling. Once you get within a foot of the ceiling you should have the cabinetry and molding meet ceiling. We are renovating our kitchen, and I want it to look elegant this time. We are looking for the best kitchen cabinets to add to the beauty of the kitchen.

  3. Garrett

    We recently started our own carpentry business and came across this article. Thanks for the good read. Take a look at our website

    1. pmcalary[ Post Author ]

      Hi Garret,
      I usually don’t let people post their websites but I have a soft spot for Bozeman Montana. One of the owners of our website development company lives in Bozeman and I designed his kitchen and shipped his cabinetry to Bozeman. I had a great time skiing at higher altitudes while I visited to measure and check on the renovation. You have a great website and a wonderful city. All the best!

  4. Sunny Armstrong

    Hi! These are really great tips! I saw a beautiful photo from Ceaserstone featured an island with a quartz countertop with a waterfall type of thing going on the sides. Is the corner of the countertop and the side waterfall not considered a seam? Also, what height of cabinetry do you recommend for an 8 ft ceiling? Lastly, are large (12 in) beige/cream ceramic tiles good for small to medium bathrooms? Thanks in advance!

    1. pmcalary[ Post Author ]

      Hi Sunny,
      A waterfall countertop has a seam. On an island a seam on the flat surface would look bad but obviously you need a 45% seam to create a waterfall with any type of stone. For an 8ft ceiling I would normally recommend that the cabinetry reach 90″ with a two part crown molding then reaching the ceiling. For slab doors and more contemporary cabinetry the cabinetry can be taller if the ceiling is very level up to 93″ and then a single flat molding is used to reach the ceiling.

      12″ tiles on the floor are fine for a small bath. Some kind of mosaic also might make the room interesting.

  5. Ruth

    Considering replacing cabinets in our small kitchen which is open to dining area (and dining area open to living room); length of kitchen area 102”, dining room 101”; width 107”. Ceiling height 96”. Currently have a 12” soffit and cabinets on each side. Sink beneath window on outside wall that measures 43 1/4” wide and is positioned 26 3/8” from the back wall of kitchen. Range and refrigerator on opposite wall with cabinet on either side of range. Currently cabinets end at 96” from back wall and balanced either side of sink but have a 42” sink base. What would you recommend in layout to balance functionality and aesthetics, especially if go to the now standard 36” sink base? And for upper cabinets do you suggest 36” with riser and crown moulding? Does deeper cabinet over refrigerator work in back corner of kitchen?

    1. pmcalary[ Post Author ]

      Hi Ruth,
      Kitchens are way to complicated to answer questions like these. If you sent us a floorplan and called in to our podcast on a Friday we could help. Call 610-500-4071 between 2-4pm on a Friday. The one quest I can answer is yes, generally you want 36″ high wall cabinets and a two piece crown molding reaching the ceiling

  6. Greg

    Hi Paul, I so wish we could find a company like yours in our area. We began by meeting with three different “professional” designers. One of them told us a remodel would cost $50,000 or more and left without even taking measurements. One of them maintained our exact, 1966 tract house layout, despite our request for improvement. And the third showed us two sample designs and when we began to ask about decisions and potential options said she couldn’t do any more until we agreed to a $2000 fee toward purchase of $60,000 plus remodel.

    We found ourselves at Lowes and just finished a design. The design, in a Kraftmaid Bagley (Shaker with small profile to inner panel) cabinet with an “aged” finish (not distressed), incorporates some of our ideas and requests and some great ideas from the designer. It priced out at just over $16,000 — if we take advantage of discount that ends 4/30 (after which 40% discount drops to 35%).

    I found your site last night though and have many areas of concern. I would love to share the design with you for your opinion and suggestions! I haven’t figured out how to do that yet but will keep looking. A huge concern after reading this article is about cabinet height. Our ceiling is low, at 90 3/4″ +/- 1/4″. At my request, thinking it would allow extra storage space, the wall cabs are 33″. After reading your responses above, I am thinking they should be 30″ with “a matching flat riser . . . and an overlapping second, smaller, flat riser [to] keep the contemporary look.”

    I would be very appreciative for any suggestions that you can offer. Thank you.

    1. pmcalary[ Post Author ]

      Hi Greg,
      Thanks for following our blog
      We respond to questions from outside our service area free of charge either on our blog via comments on the blog or by phone during our call-in podcast most Fridays between 2 and 4 pm Eastern Standard Time.

      Just call in to 610-500-4071 and leave a message during those hours and we will call you back when your turn comes up. All calls are returned even after 4pm.We review plans free of charge on the podcast simply have them ready to email before you call.


  7. Joanne

    I have 10’ ceilings 120 inches. Which size cabinets should I use to reach the ceiling ?

    1. pmcalary[ Post Author ]

      Hi Joanne,
      The question is too simplistic to answer. For example in the last 120″ high kitchen we built a coffered ceiling down to 114″ then had 9″ high stacked crown moldings and used 36″ wall below with 15″ wall cabinets above combined to create 51″ wall cabinets. That’s just one of an infinite number of possible ways to get to 120 inches.

  8. Joanne

    Would you consider coming to Florida?

    1. pmcalary[ Post Author ]

      Hi Joanne,
      We have designed spaces and sold cabinetry around the US but doing it is harder to coordinate and the customer must pay as they go (in advance) for design time. If a $2000 deposit to start seems daunting then you should get our free help on our podcast Fridays 2 – 4 pm EST.